Printable View
Hello GM,
thank you, i understood.
I will check this out for my room.
What i wrote was misleading: i only will stack for events, not at home. At home i'll lay the woofers and put the horn above.
Should i use this equipment at events i'll have more distance between the cabinets and the listener and i can arrange the woofers vertikal; that's good for horizontal dispersion too.
Thank you for the help and best regards
Wolf
great web site, aber mein bistchen deutsch sind schwer, enough to get through to the speakers.
going back for a better look
I note you added a tweeter.
a pair I had in the early 70s I put 67 ohm 20 w resistors in series with the horn and bridged them with a hand full of .1-mfd to the desired hf.
Hello older guy,
adding the resistor and the capacitors to the Altec is a good idea. I will check this out for my symbiotek ones. May be it helps a bit.
Thank you
Wolf
Hello older guy,
i added the tweeter to the "seeburg", because i built in a EV 1824M midrange driver. This driver ends at about 6000cps. It needs a tweeter.
In my Seeburg's are no Altec speakers, i needed these at another place.
I surely would never add a EV T35 to an Altec 80X-driver, the T35 ain't good enough (in my ears). It's 3dB-point is about 15000cps, here i see no advantage to Altec.
Best regards and tahnk you
Wolf
bye byeQuote:
Originally Posted by Olivia9230